Vision

A megújult Team 35 comp SL Kiváló Ár-érték arányú országúti kerékszett.

Our Team components represent high performance and value for money.
The all-alloy Team 35 Comp SL wheelset shares many features of our high-end wheelsets, including: aero bladed spokes, an asymmetric 2:1 rear lacing pattern, CNC machined braking surfaces, sealed cartridge bearings and hand-built quality. 35mm deep alloy clincher rims give aerodynamic benefits without an excessive weight penalty. CNC machined new rear hub from TRIMAX whelsets are durable and smooth-running.
The NEW Team 35 Comp SL is available for Shimano 10/11speedd cassettes and is an excellent training or entry-level racing wheelset.

Features
• Alloy 35mm deep clincher rim - CNC bracking surfaces
• CNC machined aluminum hubs (Trimax)
• sealed cartridge bearings in hubs
• Black Aero bladed spokes
• Artisanal built, entirely by hand
• Includes QR-25 and spoke protector
• Rims - sandblasted black anodized (The black braking surface is an aesthetic finishing, it will change color during use)

Specs
• Aluminium free-hub body for Shimano 10-11speed
• Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 3 drive side and 7 radial non drive side (2:1 Ratio)
• 1740g / set (w/o QR)

A Team szériában a második helyen helyezkedik el ez a kerékszett, A Team 30 comp-hoz képes itt már nem kónuszos, hanem zárt ipari csapágyazás került beépítésre, így tartósabb, kifinomultabb, és erősebbé válik a szett.

Our Team components represent high performance and value for money. The all-alloy Team30 wheelset shares many features of our high-end wheelsets, including: aero bladed spokes, an asymmetric 2:1 rear lacing pattern, CNC machined braking surfaces, sealed cartridge bearings and hand-built quality. 30mm deep alloy clincher rims give aerodynamic benefits without an excessive weight penalty. CNC machined alloy hubs are durable and smooth-running. The Team30 is only available for Shimano 10/11spd cassettes and is an excellent training or entry-level racing wheelset.

Features
• Alloy 30mm section clincher Tubeless Ready rim
• CNC braking surface
• CNC machined aluminum hubs
• 4 Sealed cartridge bearings
• Black Aero bladed spokes
• Includes QR-60, rim tape and spoke protector
• Artisan built, entirely by hand
• Rims: Sandblasted Black anodized (the black braking surface is an aesthetic finish, it will change color during use)
• Front & rear hubs: Black anodized

Specs
• Steel freehub body for Shimano 10-11speed • Flat spokes (F/R): 20 radial front wheel; 24 rear wheel, 16 cross x3 drive side and 8 radial non drive side
• Weight 1820g / set (w/o QR)

Fullkarbon felni, 25,5 mm-es szélesség, aero küllők, szélcsatornában tesztelt, bizonyítottan magas aerodinamikai tulajdonságokkal rendelkezik. Ezek a szettek is bizonyítják, hogy a Vision kerekek a világ legjobbjai között vannak. Ne keress tovább.

Jellemzők
• Full karbon 40 mm-es clincher felni (peremes)
• Direct Pull aero küllők
• 6 zárt ipari csapágy (2 F + 4 R)
• Speciális ABS önzáró küllőanyák
• Kézzel készített,és kalibrált
• Tartalmaz egy szett speciális QR-t(QR-65), fékbetéteket, felni szalagokat.
• A felni UD karbon alapanyagból készül.

Mondhatni ez a Metron család kis testvére, kiemelkedő ár/tudás arányban.

Specifikációk
• Alumínium kazettatest Shimano 10-11 sebességhez
• Fűzés (F / R): 16 radiális első kerék; 21 hátsó kerék
• Minimum 23 mm-es köpeny!
• Súly 1590 g / szett

 

https://shop.visiontechusa.com/en/trimax-carbon-40

Alu karbon országúti kerékszett 45mm-es.

Triatlonra kiemelkedően univerzális kerék, de síkon, vegyes terepen is helyt áll.

A fékhatás bármilyen körülmények közt tökéletes az alu fék felületnek köszönhetően.

• CSI Carbon Alloy clincher rim; 45mm deep
• Alloy hubs for DP spokes
• 6 sealed cartridge bearings (2 F+4 R) mounted
on a 17mm hub axle diameter • Aero blade spokes
• Special ABS self locking nipples
• Artisanal built, entirely by hand
• Aluminum freehub body for Shimano 9-10-11sp
• Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross X 2 drive side and 7 radial non drive side (2:1 ratio)
• Rims – 3K Carbon finish
• Front & Rear hubs – Black anodized
• Spokes – black
• 1.720 grams / pair (w/o QR)

Tubeless Ready! Center lock tárcsa rögzítés
•  clincher (peremes)
• CNC-megmunkált alumínium kerékagyak - ISO interfész
• 6 zárt patroncsapágy (2F + 4 R)
• Az Aero DP küllők
• ABS önzáró küllőanyák
• Handmade (kézzel készített)
• Tartalmaz adaptereket: QR / TA15 / TA12 HÁTSÓ: QR / TA12 / X12 + a normál hagyományos rögzítés.
• 1590g

The TriMax 30 Disc is perfect for going fast on pavement, dirt or for CX racing.

A Vision Team széria alap verziója, kiváló ár-érték arány, ütős megjelenés.

Kónuszos agyak.

• Alloy 30mm section clincher rim
• CNC braking surface
• CNC machined aluminum hubs with 4 Loose-Ball bearings
• Black Aero bladed J-bend spokes
• Artisan built, entirely by hand
• Steel freehub for Shimano 10-11Speed
• Color graphics options - Black with Gray
• Includes QR, rim tape and spoke protector
• Weight 1.920 grams / pair (w/o QR)

A Trimax 30 kiváló teljesítményt kínál minden felhasználáshoz. Szélesebb abroncsprofillal rendelkezik, és már tubeless ready!

P.R.A. kerékagyak és aero küllők, kézzel készített és kalibrált kerekek.

Vision Team 30 6B (6 csavaros tárcsa rögzítés) Tubeless országúti/gravel kerékszett

Tubeless ready

Különböző adapterek a kerék rögzítéshez. QR, QR9/10, TA12, TA15 a X12

The Disc version of the Team 30 brings an affordable semi-aero wheelset to the latest generation of disc brake-equipped bikes. Construction is very similar to the rim brake Team 30, with 30mm deep aluminum rims and CNC machined hubs with sealed cartridge bearings. Disc brakes put very different loads on wheels than rim brakes, so the Team30 Disc is beefed up with more spokes 24 front, 28 rear. 2-cross lacing at the front and a mix of 2- and 3-cross at the back deals with the torque demands of disc brakes.

• Alloy 30mm section clincher rim
• Tubeless ready
• CNC machined aliminium hubs for Center-Lock Disc
• 4 sealed chromoly cartridge bearings
• Aero bladed spokes
• Steel hub for Shimano,Sram 10-11
• maximum pressure 8.5 Bar
• packaging includes QR and adaptors for QR, QR9/10, TA12, TA15 a X12

Vision’s Metron 40 SL is the tactical wheel essential to your quiver. The Metron 40 SL wheelset is built for both climbing and CX. Victorious on the Cyclocross course, the cobbles of the spring classics, and the torturous mountain stages in the Pro peloton, this wheelset can handle whatever you put them through. Vision’s complete wheel system has a 17mm internal rim width, direct pull bladed spokes, ABS brass nipples, 2 to 1 lacing, CFD / wind tunnel proven aerodynamics, and 100+ pro-podium finishes over the last few seasons. Available in both Clincher and Tubular, these wheels will suite all of your personal needs. This wheelset is living proof that Vision wheels are among the best in the business. Look no further, your new carbon wheelset is waiting!
Look no further, you’re new Clincher or Tubular wheelset is waiting.

Features
• Full Carbon 40mm section clincher rims
• upgraded P.R.A. hubs with DP spokes
• 6 sealed cartridge bearings (2F + 4R)
• 2:1 aero bladed spokes 21F / 24R
• Angular contact bearings on rear hub
• Black Aero bladed spokes
• ABS self locking nipples
• Artisan built, entirely by hand
• Includes QR-93, brake pads and spoke protector
• Includes adapters for Front QR, QR-9, TA12 orTA15 and REAR QR, QR-10, TA-12 or X12 • Aluminum Shimano/Sram/FSA 10-11sp freehub
• 1580g / pair (w/o QR)

A Trimax 25 KB  minden felhasználáshoz. Széles aszimmetrikus kerékprofillal rendelkezik - 20 mm-es felni (elülső) és 24 mm-es (hátul). A Trimax 25 KB tubeless ready. megújul agyak, szupermerev, és könnyű. Teljesen állítható P.R.A. Kerékagy és aero küllők, kézzel épített és kalibrált. A mindössze 1380 gramm súlyú Trimax 25 KB kiváló választás minden hegymászó számára.

P.E.O. HARD COATING segítségével megtartja fekete színét a felni fékezőfelülete.

 

    Alloy tubeless ready/clincher rims
    Front: 20mm depth – Rear: asymmetric 24mm depth
    Interspoke milling R06 system
    P.E.O. hard coating
    New extra light P.R.A. hubs for DP spokes
    6 sealed ACB bearings (2 F+4 R) mounted on a 17mm hub axle diameter
    Aero bladed spokes
    ABS self locking nipples
    Artisan built, entirely by hand
    Alloy Shimano 10-11sp / option: SRAM XDR freehub or Campagnolo 10-11sp freehub available separately
    Includes Alloy QR-93 and rim tape

Shimano 10-11 sebességes rotor

Tubeless Ready

Shimano Centerlock tárcsa rögzítés

Peremes

Tartalmaz adaptereket: QR / TA15 / TA12 HÁTSÓ: QR / TA12 / X12

 

The Metron 81 SL TL is Vision’s Aero Time Trial focused wheelset. Vision’s complete wheel system has a 24mm Tubeless rim width, direct pull bladed spokes, 6 sealed cartridge bearings in P.R.A. hubs, ABS brass nipples, 2 to 1 lacing, CFD / wind tunnel proven aerodynamics, and 100+ pro-podiums over the last few seasons. The Metron 81 SL are living proof that Vision wheels are amongst the best in the business.
Look no further, you’re new Clincher or Tubular wheelset is waiting.

Features
• Full Carbon 81mm section clincher Tubeless rims
• upgraded P.R.A. hubs with DP spokes
• 6 sealed cartridge bearings (2F + 4R)
• 2:1 aero bladed spokes 16F / 21R
• Angular contact bearings on rear hub
• Black Aero bladed spokes
• ABS self locking nipples
• Artisan built, entirely by hand
• Includes QR-93, brake pads and spoke protector
• Aluminum Shimano/Sram/FSA 10-11sp freehub
• 1820g / pair (w/o QR)

Vision Team 30 DB CenterLock Tubeless országúti/gravel kerékszett

Tubeless ready

Center Lock tárcsfék rögzítés

Különböző adapterek a kerék rögzítéshez. QR, QR9/10, TA12, TA15 a X12

The Disc version of the Team 30 brings an affordable semi-aero wheelset to the latest generation of disc brake-equipped bikes. Construction is very similar to the rim brake Team 30, with 30mm deep aluminum rims and CNC machined hubs with sealed cartridge bearings. Disc brakes put very different loads on wheels than rim brakes, so the Team30 Disc is beefed up with more spokes 24 front, 28 rear. 2-cross lacing at the front and a mix of 2- and 3-cross at the back deals with the torque demands of disc brakes.

• Alloy 30mm section clincher rim
• Tubeless ready
• CNC machined aliminium hubs for Center-Lock Disc
• 4 sealed chromoly cartridge bearings
• Aero bladed spokes
• Steel hub for Shimano,Sram 10-11
• maximum pressure 8.5 Bar
• packaging includes QR and adaptors for QR, QR9/10, TA12, TA15 a X12

Egy pár kerék tárolására alkalmas, belső zsebekkel, megerősített részekkel.